Web Administrator - Adobe 65029902 - Robohelp Server - PC Using Manual

3
Assign the name or address of the server.
4
Publish the content.
See also
"Deploying Adobe RoboHelp Server on
Test the server
1
Open WebAdmin by entering the URL
of the browser window.
Note: Enter the default user ID and password as
2
Select the Projects panel.
3
Click View Project. Publish at least one project to view its content.
4
Obtain the name of the server.

Web Administrator

About the Web Administrator
The Web Administrator is a browser-based server interface. It lets administrators or documentation managers
maintain permissions for users without going through a network administrator. It enables you to maintain databases
by letting you delete old data from the Web Admin interface.
Open the Web Administrator interface
1
Do one of the following in your browser:
• If RoboHelp Server is not installed on the same computer, use the Web Administrator URL:
http://[IP address or server name]/robohelp/admin/
• If RoboHelp Server is installed on the same computer, use this Web Administrator URL:
http://localhost:port number/robohelp/admin/
2
Enter the username and the password as
3
Click Sign in.
Note: You must have the Apache Tomcat server running before starting RoboHelp Server 8.
Enable user authentication
The Web Administrator interface enables you to segregate the Help content published on the server into protected and
public areas. Only authenticated users can view the content published in protected areas, but no authentication is
required to view content published in public areas.
Note: You do require authentication to publish content to public or protected areas.
By default, RoboHelp Server creates a public area, general. All the RoboHelp HTML 7 projects are published to the
general area only.
Windows" on page 3
http://<robohhelpserver>:port/robohelp/admin
and
admin admin
and respectively.
admin admin
USING ROBOHELP SERVER 8
respectively.
14
Managing the server
in the address bar