Ashly SRA-TR2 Installation

Features:
• Designed Specifically for the SRA-120
• Mounted, Dual 60W/70V Transformers and Terminal Strip
• Secondary Wiring Terminated to #8 Screw Terminal Block
• 14" 20 ga. Input Wire
The Ashly SRA-TR2 60W/70V transformer option allows the Ashly SRA-120 power amplifier
to drive 70 volt distributed sound loads. Mount the transformer option directly next to an SRA-120
for connecting to the amplifier outputs. Separate transformers are used for channel one and channel
two. Transformer input wires are pre-stripped for connecting to the SRA-120 binding posts, while
70 volt transformer outputs are factory wired to #8 screw teminals for speaker wire connections. The
following diagram shows the proper use of the SRA-TR2. Please note that the SRA-TR2 is not
compatible with other power amplifiers, only the Ashly SRA-120.
To Amplifier Output Ch 2
Specifications:
Maximum Wattage: 60 Watts (RMS) • Input: 4 ohms • Output: 70.7 Volts RMS •
Frequency Response: 50~15,000 Hz, +/- 2dB • Insertion Loss: 0.5dB • Termination: 14", UL1015, 20 ga. lead
wire • Dimensions: 19.0" W x 3.5"H x 3.0"D • Net Weight: 5.0 lbs. • Shipping Weight: 7.0 lbs.
(Red)
(Blk)
Red = 4
Black = Com
70 Volt Output
Blue = 70V
Black = Com
Ch 2
+
Com
(Red)
(Blk)
To Amplifier Output Ch 1
Red = 4
Black = Com
Blue = 70V
Black = Com
Ch 1
+ Caution: Risk Of Electric Shock.
Com
Disconnect From Amplifier Outputs
Before Connecting Speakers.