Winscript Live Resources; Sequences; Sequence Columns - Alcorn Mcbride Pro Series User Manual

WinScript Live Resources

The actions performed by the show controller are created by using the show controller's "resources." These
resources can be accessed using the side toolbar, or from the "Resources" menu.

Sequences

Scripts are made up of sequences that are groups of events.

Sequence Columns

Notice the columns labeled D, A, L and Status just before the Sequence Name column. Clicking on
the box places a check mark in the column for that sequence.
D is disable, the sequence will not be checked for errors or run. This allows you to remove that line
from the show without deleting it from your script.
A is autostart and will run the sequence when the script is started.
L is for looping the sequence.
Status/Control is a real time event indication of what is running in the show controller when in
"Live" mode. Also you can control the sequence as you wish outside the normal script flow.
Sequence is stopped if highlighted, will stop it the sequence if it is running
Sequence is paused if highlighted, will pause the sequence if it is running.
Sequence is running when highlighted, will start the sequence if it is stopped.
WinScript Live Resources Page 35