Hitachi UltraVision 42HDX62 Online Manual page 93

Setup
Set Stand-By Mode
This function sets the IEEE1394 in Stand-By Mode to
ON or OFF. Certain digital devices have a power save
feature, in which the device automatically powers OFF
when not in use (sleep mode). Only by setting the
IEEE1394 function in Stand-By mode to ON, will the TV
be able to control a device that is in sleep mode.
Use CURSOR PAD or to highlight "IEEE1394
Stand-By" and press SELECT to set this option.
NOTE: By turning on the IEEE1394 function, your TV
will no longer be set for power saving Stand-
By mode. The IEEE Stand-By function must
be set to OFF to return your TV set to power
saving Stand-By mode.
Power Swivel
This feature controls the motorized stand. It allows
the customer to turn the plasma display left or right
using the remote control. This feature is only
available when the Table Top Stand is connected.
1. Use the CURSOR PAD
the Power Swivel.
Exit the OSD menu system before controlling the
motorized stand.
2. Press the CURSOR PAD
the right.
3. Press the CURSOR PAD
the left.
4. Release the CURSOR PAD to stop rotation.
NOTE: 1. The Power Swivel has a maximum turning radius of 30° (left and right).
2. Do not place any objects in the path of the monitor when using the power swivel feature.
3. Before using the power swivel, please make sure that the path of the monitor is clear of any
fingers, hands or any other body parts to avoid causing injury.
4. When the Picture-In-Picture (PIP) or Freeze mode is ON, the Power Swivel is disabled.
or to unlock or lock
to to rotate the TV to
to to rotate the TV to
Setup
Menu Preference
Screen Saver
Set The Inputs
Set AV NET
Set Closed Captions
Set Monitor Out
Upgrades
Set Stand-By Mode
Move SEL Select
Setup
Set Stand-By Mode
OR If you want to use the IEEE1394
function while in Stand-By, please
set the IEEE1394 Stand-By mode.
IEEE1394 Stand-By
Move SEL Return
Video
Audio
Channel Manager
Locks
Timers
Setup
or Power Swivel
Move SEL Select
or
Power Swivel Locked
Return
Select SEL
93