Configure Wpa/Wpa2-Enterprise; Using The D-Link Utility - D-Link DWA-548 Manual

Section 4 - Wireless Security
WPA/WPA2-Enterprise is for advanced users who are familiar with using a RADIUS server and setting up certificates.
1. Open the Wireless Connection Manager by double-clicking on the D-Link icon
on your desktop. Click on New to create a new profile or highlight an existing
profile and click Modify.
2. Select WPA/WPA2-Enterprise under Set Security Option and then select TKIP
or AES.
3. Next to EAP Type, select EAP-TLS or PEAP. Extensible Authentication Protocols
allow devices on the network to request authentication from the RADIUS server
in the network. All the devices on the network must use the same EAP type
when using a RADIUS server for authentication. Some RADIUS servers require
that the Validate Server field be selected. Check this field if your RADIUS server
requires validation.
4. Select an User Certificate from the drop-down menu.
5. Enter the login information required to authenticate.
6. Click Add to enter the IP address(es) of your RADIUS servers.
7. Click OK to save your settings.
D-Link DWA-548 User Manual

Configure WPA/WPA2-Enterprise

Using the D-Link Utility

38