Installing Cpu And Heatsink - Asus AP1600R User Manual

Dual intel xeon 1u rackmount server

Hide thumbs Also See for AP1600R:

Table of Contents

2.3 Installing CPU and heatsink

The 604-pin Zero Insertion Force (ZIF) sockets on the PR-DLSR motherboard

support dual Intel

CPU. Refer to the motherboard user guide for more information.

A CPU has a gold triangular mark on one corner. This mark indicates the

processor Pin 1 that should match a specific corner of the CPU socket.

PR-DLSR

PR-DLSR Socket 604

CAUTION

Incorrect installation of the CPU into the socket may bend the pins

and severely damage the CPU!

NOTES

The motherboard supports either one or two CPUs. If you are

installing only one CPU, you MUST install it in CPU socket 1.

There is no need to install a CPU terminator even if you are installing

only one CPU.

Xeon™ processors. This section tells you how to install a

Xeon Processor

Gold Mark

CPU Socket 1

(outer socket)

CPU Socket 2

(inner socket)

Chapter 2: Hardware Setup

Table of Contents