HP P6230F - Pavilion - Desktop PC Getting Started page 41

Wireless keyboard and mouse (continued)
Symptom
Wireless keyboard or
mouse does not work or
is not detected.
(continued)
Possible solution
3 Check that the mouse is on (B), and push and hold the
Connect button (C) on the underside of the mouse for
5 to 10 seconds until the LED (A) on the receiver lights or
stops flashing.
Off
B
On
4 After the mouse connection is established, continue with
the steps that follow to repeat the procedure for the
keyboard.
5 Skip this step if your receiver model has no Connect
button (A).
Push the Connect button on the receiver (A), and hold it
for 5 to 10 seconds until the light starts to flash.
6 Push and hold the Connect button (D) on the underside of
the keyboard for 5 to 10 seconds until the LED (A) on the
receiver lights or stops flashing.
D
NOTE: The receiver
connection session
times out after
C
60 seconds. To ensure
Connect
the connection was
established, and that
the receiver did not
time out instead, move
the mouse and check
for response on the
screen.
Troubleshooting and Maintenance 35