Table of Contents
Advertisement
The A7V266-MX uses the Micro ATX form factor, measuring 24.5 cm (9.6 in.) x
24.5 cm (9.6 in.) - a standard fit for most large chassis.
Unplug the power cord before installing the motherboard. Failure to do so may
cause you physical injury and damage Motherboard components.
1.6.1 Placement direction
Orient the motherboard with the chassis before installation. The edge with external
ports goes to the rear part of the chassis. Refer to the image below. It may be
more convenient to install major cables, the CPU and modular components before
fixing the motherboard inside the case frame.
1.6.2 Screw holes
Place eight (8) screws into the holes indicated by circles to secure the
motherboard to the chassis.
Do not overtighten the screws! Doing so may damage the motherboard.
Place this side
towards the rear of
the chassis
1-8
Chapter 1: Product introduction
- Quick Links:
- Motherboard Components
Hide quick links:
Advertisement
Table of Contents
