2. HARDWARE SETUP
2.3.1 CPU Installation
Step 1: Install the Baseboard
A metal baseboard is required to install the heatsink to the motherboard. A rubber
pad is placed between the metal board and motherboard to provide insulation to
prevent shorting. (NOTE: Motherboard layout is not identical to the example.)
Align the rubber pad over
the metal baseboard so that
the holes match. Align the
motherboard over the rub-
ber pad and metal base-
board so that the screws on
the baseboard match up
with the motherboard's
screw holes.
Place the four washers over the four
screws on the baseboard.
I M P O R T A N T :
This step is a M U S T! The washers
are necessary to prevent shorting.
8
Rubber Pad Metal Baseboard
ASUS P4T-M Quick Setup Manual
Tighten the four copper captive
nuts over the washers.
Copper captive nut
Washer