Asus ASMB-LE User Manual page 16

Server management board

Table of Contents

Take note of the following precautions before you install the server

management board to the server system.

•

To install the server management board:

Remove the server system

cover, then locate the

Baseboard Management

Controller (BMC) socket on the

motherboard.

Refer to the Appendix

section for the location of

the BMC socket on supported

motherboards.

Position the board at a 30º-45º

angle, then match the notch on

the board with the break on the

socket.

2 - 2

Unplug the server system power cord from the wall socket before

touching any component.

Use a grounded wrist strap or touch a safely grounded object or to

a metal object, such as the power supply case, before handling

components to avoid damaging them due to static electricity.

Hold components by the edges to avoid touching the ICs on them.

Whenever you uninstall any component, place it on a grounded

antistatic pad or in the bag that came with the component.

B e f o r e y o u i n s t a l l o r r e m o v e a n y c o m p o n e n t , e n s u r e

t h a t t h e p o w e r s u p p l y i s s w i t c h e d o f f o r t h e p o w e r

c o r d i s d e t a c h e d f r o m t h e p o w e r s u p p l y . Failure to do so

c o r d i s d e t a c h e d f r o m t h e p o w e r s u p p l y .

may cause severe damage to the motherboard, peripherals, and/or

components.

C h a p t e r 2 : I n s t a l l a t i o n

Table of Contents