Asus Xonar D2 Test Manual page 6

7.1 channel audio card 192khz/24bit duplexhd featuring dolby and dts technologies for home entertainment, rmaa 6.0.5 test guide and results

Hide thumbs Also See for Xonar D2:

Table of Contents

2. Select

24bit and 48KHz

remember to go back to set the

Please mind that Xonar D2 currently supports 44.1K, 48K, 96K, and 192KHz. 88.2K,

176.2KHz, and 32bit(float) tests are not supported.)

3. Click the

General

in 20Hz-20KHz

4. It's recommended by RMAA to ignore the two tests: "Frequency response (swept sine)"

and "Total harmonic distortion (set of tones)", which are for speaker test primarily.

5. Click

loop-back playback/record test button

6. Check that the Adjusting level window shows that the levels are OK (the level meter will

be green). Begin the test by clicking the

for the test signals. (If you change the format here, please

SAME sample rate

test options in RMAA and make sure

range" (audio in-band for human hearing) is selected.

ASUS Xonar D2 Audio Card

RMAA6.0.5 Test Guide V.1.1

output in the Xonar D2 Audio Center.

"Analyze noise and distortion only

"Start

test" button.

http://www.asus.com/

P.6

Table of Contents