Related Manuals for Akura APCD713MP
Summary of Contents for Akura APCD713MP
- Page 1 APCD713MP MP3/CD/Radio Portable Player I N S T R U C T I O N M A N U A L Customer Help Line 01422 263313 Opening hours Mon-Fri 8 am – 8pm. Sat 9 am – 4pm. Sun 11am – 4pm “Bank holidays as Sun”...
- Page 2 WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : SHOCK HAZARD-DO NOT OPEN LIGHTNING FLASH WITH ARROWHEAD SYMBOL - EXCLAMATION POINT - within an equilateral triangle, within an equilateral triangle, is intended to alert the is used to indicate that a specific component shall be user to the presence of uninsulated dangerous...
-
Page 3: Safety Instructions
SAFETY INSTRUCTIONS 1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. 2. RETAIN INSTRUCTIONS - The safety and operating instruction should be retained for future reference. 3. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to. 4. -
Page 4: Power Sources
POWER SOURCES Insert 6 x “C” size batteries to a wall outlet to AC IN into the battery compartment AC POWER Connect to a 230/240V AC 50 Hz supply. Do not attempt to connect to any other source. BATTERY POWER Insert 6 x “C”... -
Page 5: Location Of Controls
LOCATION OF CONTROLS FM ANTENNA CD DOOR FUNCTION BAND SELECTOR SELECTOR TUNING CONTROL VOLUME CONTROL DIAL POINTER OPEN / CLOSE LCD DISPLAY FM STEREO INDICATOR ALBUM POWER INDICATOR PROGRAM PLAY / PAUSE MODE STOP SKIP - SKIP +... -
Page 6: Radio Operation
RADIO OPERATION GENERAL OPERATION 1. Set the “FUNCTION” selector to “RADIO” mode. 2. Select desired band by using the “BAND” selector. 3. Adjust radio frequency to your desired station by using the “TUNING” control. 4. Adjust the “VOLUME” control to the desired level. FM / FM-STEREO RECEPTION - Set the “BAND”... - Page 7 CD / MP3 OPERATION GENERAL OPERATION PLAY / PAUSE Press to start playing CD / MP3 disc. Press again to stop playing CD / MP3 operation temporarily. Press again to resume playback. SKIP + & Press to go to the next track or back to the previous track. SKIP - Press and hold while playing until you find the point of the sound.
- Page 8 CD / MP3 OPERATION PROGRAM Up to 20 tracks can be programmed for disc play in any order. Be sure to press the “STOP” button before use. 1. Press the “PROGRAM” button, the display will show “P01” and flash. 2. Select desired track by using the “SKIP +” or “SKIP -” button. (You may select a desired album by pressing the “ALBUM”...
-
Page 9: Fault Guide
FAULT GUIDE Should you experience any problems please see guide below before cslling the help line. Symptom Possible Cause Remedy Check the power plug is in firmly and connected to a Dead No operation No power to player power supply. If batteries are fitted ensure they are new and fitted the correct way round... -
Page 10: On Handling Discs
ON HANDLING DISCS ON CLEANING DISCS Do not touch the playback side of the disc. Fingerprints and dust on the disc cause sound distortion and skipping of tracks. Wipe the disc Do not attach paper or tape to disc. from the centre outwards with a soft cloth. If you can not wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened soft cloth and finish with a dry cloth.
Need help?
Do you have a question about the APCD713MP and is the answer not in the manual?
Questions and answers