Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Akura APCD-713A
- Page 1 INSTRUCTION MANUAL APCD-713A Customer Help Line 01422 263313...
- Page 2 WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : SHOCK HAZARD-DO NOT OPEN LIGHTNING FLASH WITH ARROWHEAD SYMBOL - EXCLAMATION POINT - within an equilateral triangle, within an equilateral triangle, is intended to alert the is used to indicate that a specific component shall be user to the presence of uninsulated dangerous...
-
Page 3: Safety Instructions
SAFETY INSTRUCTIONS 1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. 2. RETAIN INSTRUCTIONS - The safety and operating instruction should be retained for future reference. 3. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to. 4. -
Page 4: Power Sources
POWER SOURCES Insert 6 x “C” size batteries into the battery compartment to a wall outlet to AC IN AC POWER Connect to a 230/240V AC 50 Hz supply. Do not attempt to connect to any other source. BATTERY POWER Insert 6 x “C”... -
Page 5: Location Of Control
LOCATION OF CONTROL FM ANTENNA CD DOOR FUNCTION BAND SELECTOR SELECTOR TUNING CONTROL VOLUME CONTROL DIAL POINTER OPEN / CLOSE LED DISPLAY FM STEREO INDICATOR POWER PROGRAM INDICATOR SKIP - REPEAT SKIP + PLAY / PAUSE STOP... -
Page 6: Radio Operation
RADIO OPERATION GENERAL OPERATION 1. Set the “FUNCTION” selector to “RADIO” mode. 2. Select desired band by using the “BAND” selector. 3. Adjust radio frequency to your desired station by using the “TUNING” control. 4. Adjust the “VOLUME” control to the desired level. FM / FM-STEREO RECEPTION - Set the “BAND”... - Page 7 CD OPERATION GENERAL OPERATION PLAY / PAUSE Press to start playing CD disc. Press again to stop playing CD operation temporarily. Press again to resume playback. SKIP + & Press to go to the next track or back to the previous track. SKIP - Press and hold while playing until you find the point of the sound.
- Page 8 CD OPERATION PROGRAM Up to 20 tracks can be programmed for disc play in any order. Be sure to press the “STOP” button before use. 1. Press the “PROGRAM” button, the display will show “01” and flash. 2. Select desired track by using the “SKIP +” or “SKIP -” button. 3.
-
Page 9: Fault Guide
FAULT GUIDE Should you experience any problems please see guide below before calling the help line Symptom Fault Action Dead. No Operations No power to player. Check the power plug is in firmly and connected to a power supply. If batteries are fitted, ensure they are new and fitted the correct way round. -
Page 10: On Handling Discs
ON HANDLING DISCS ON CLEANING DISCS Do not touch the playback side of the disc. Fingerprints and dust on the disc cause sound distortion and skipping of tracks. Wipe the disc Do not attach paper or tape to disc. from the centre outwards with a soft cloth. If you can not wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened soft cloth and finish with a dry cloth.
Need help?
Do you have a question about the APCD-713A and is the answer not in the manual?
Questions and answers