Typical Programming Sequence - Apogee ETHCX1 User Manual

ETHCX1

2020.3.4 TYPICAL PROGRAMMING SEQUENCE:

The User Logs onto the ETHCX1...
[user@localhost userhome]$ ./client -i 192.168.0.10 -p 1501
Connecting to 192.168.0.10
Connected.
The User Switches to Configure Mode for the ETHCX1...
>CONTROL=ETHCX1
ETHCX1
The User types "Help" to get the ETHCX1 commands...
>HELP
HELP
ETHCX1 1.0 (1.0 )
SET/READ IP ADDRESS
SET/READ NETMASK
SET/READ GATEWAY
SET/READ PORT
CONFIRM IP
RESET IP
CONTROL=ETHCX1, AL4300
The User 'reads' the IP settings of the ETHCX1...
>READ IP ADDRESS
IP ADDRESS 192.168.0.10
>READ NETMASK
NETMASK 255.255.255.0
>READ GATEWAY
GATEWAY 192.168.0.1
>READ PORT
PORT 1501
APOGEE LABS, Inc.
INTERFACE CONTROLLER MODULE
AL4300 Series
5.25.04
2020-9