TP-Link TL-WR843ND User Manual page 55

default setting is Automatic, which can select WPA-PSK (Pre-shared key of WPA) or
WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's
capability and request.
 Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select
either Automatic, or TKIP or AES as Encryption.

Note:
If you check the WPA-PSK/WPA2-PSK – Personal (Recommended) radio button and
choose TKIP encryption, you will find a notice in red as shown in
 PSK Password - You can enter ASCII characters between 8 and 63 characters or 8 to 64
Hexadecimal characters.
 Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
WPA /WPA2 – Enterprise - It's based on Radius Server.

 Version - you can choose the version of the WPA security on the drop-down list. The
default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
 Encryption - You can select either Automatic, or TKIP or AES.

Note:
If you check the WPA /WPA2 – Enterprise radio button and choose TKIP encryption, you
will find a notice in red as shown in Figure 4-23.
 Radius Server IP - Enter the IP address of the Radius server.
TL-WR843ND 300Mbps Wireless AP/Client Router User Guide
Figure 4-22
Figure 4-23
- 47 -
Figure 4-22.