TP-Link TL-WR843ND Quick Installation Manual

Quick Installation Guide

300Mbps Wireless AP/Client Router
TL-WR843ND
MODEL NO.
2
Con guration for Windows with Setup Wizard
If you are using a MAC/Linux or a windows computer without a CD drive to run the mini CD, please refer to Appendix 1 for configuration.
Insert the TP-LINK Resource CD into the CD-ROM drive.
1
Select TL-WR843ND and click Easy Setup Assistant.
2
7106503962

Package Contents

300Mbps Wireless AP/Client Router
3 4
MODEL NO. TL-WR843ND
QIG
TL-WR843ND
Passive PoE Injector Power Adapter
Resource CD Ethernet Cable
Click START to start the con guration.
3
Connect the Router to your computer and power on
4
the Router. Click NEXT.
1

Hardware Connection

Here we take the Client Router (WISP) mode for example. If you want to achieve other applications, please refer to the User Guide on the
resource CD.
WISP Signal
1 Connect your computer to the LAN port of your Router with an Ethernet Cable.
Plug one end of the provided power adapter into the POWER jack of the Router, and the other end to a standard electrical
2
wall socket. Then press the ON/OFF button of the Router.
Please con rm the work mode switch is in WISP mode.
3
1. You are recommended to place the Router away from electrical devices, such as ceiling fans, home security systems,
microwave and the base for a cordless phone.
2. If the distance between the outlet and the Router is too long to supply power, you can set up the hardware connection with the
provided Passive PoE Injector.
Turn the work mode switch to WISP. Click NEXT to continue.
5
After con rming the hardware connection and the status
6
of LEDs, please select the target wireless network you want
to join. You can also set it mannually. Click NEXT.
TL-WR843ND
WPS/
INTERNET ROUTER WISP RESET
7 Enter the password of your wireless network. Sometimes
it may be provided by your WISP. Cllick NEXT.
8 Select the connection type your ISP provides and click NEXT.
Here we take Dynamic IP for example.
(To be continued)