Acer Extensa 710 User Manual page 119

If pressing a key does not turn the display back on, two
things might be the cause:
The contrast and/or brightness level might be too low.
Press Fn- and Fn- to adjust the contrast level (only for
models with SCC LCDs). Press Fn-
adjust the brightness level.
The display device might be set to an external monitor.
Press the display toggle hot key Fn-F6 to toggle the
display back to the computer.
Image is not full-screen.
Make sure the resolution is set to 800x600 (12.1-inch
displays) and 1024x768 (13.3-inch displays). Right-click on
your Windows 95 desktop and select Properties to bring up
the Display Properties dialog box. Then click on the
Settings tab to make sure the resolution is set to the
appropriate resolution. Resolutions lower than the
specified resolution is not full-screen on the computer or on
an external monitor.
No audio from the computer.
Check the following:
The volume may be muted. In Windows 95, look at the
volume control icon on the taskbar. If it is crossed-out,
click on the icon and deselect the Mute option.
The speakers may be turned off. Press Fn-F8 to turn
the speakers on (this hot key also turns the speakers
off).
The volume level may be too low. In Windows 95, look at
the volume control icon on the taskbar. Click on the
icon and adjust the level. You can also use the volume
control knob on the right panel of the computer to
adjust the volume.
Chapter 6 Troubleshooting
Frequently-Asked Questions
and Fn- to
99