Tv/Dvd Combo Components; Package Contents; Front - Insignia NS-24LD120A13 User Manual

Insignia 24" LCD TV/DVD Combo
4 Remove the stand column.
5 Attach the wall-mount bracket to your TV/DVD
combo using the mounting holes on the back of
your TV/DVD combo. See the instructions that
came with the wall-mount bracket for
information about how to correctly hang your
TV/DVD combo.
Note
• The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with
the wall-mount bracket for screw lengths.
• The mounting holes on the back of your
TV/DVD combo take type M4 screws.
3.94 in. (100 mm)

TV/DVD combo components

Package contents

• Remote control and batteries (2 AAA)
• Stand
• Quick Setup Guide
• Important Information

Front

# Item
1
Power indicator
2
Remote control sensor
3
INPUT
4
MENU
5
CH /CH
6
VOL+/VOL–
7
(play/pause)
8
EJECT
9
POWER
www.insigniaproducts.com
Description
Turns off when your TV/DVD combo is on.
Lights red when your TV/DVD combo is off (standby
mode).
Receives signals from the remote control. Do not block.
Press to open the INPUT SOURCE list, press CH or
CH to select a video input source, then press INPUT
again. For more information, see "Selecting the video
input source" on page 20.
In menu mode, press to confirm selections.
Press to open the on-screen menu. For more
information, see "Navigating the menus" on page 21.
Press to go to the next or previous channel in the
channel list. For more information, see "Selecting a
channel" on page 22.
Press to increase or decrease the volume.
Press to start or pause disc playback
Press to eject a disc from the disc slot.
Press to turn your TV/DVD combo on or off (standby
mode). When your TV/DVD combo is off, power still
flows through it. To completely disconnect power,
unplug the power cord.
5