Advertisement
SCSI related issues
Previously, if more than one command was sent from the same host to the primary port and the same LUN
and one of those commands was aborted, the others were also aborted. This was because the firmware
treated this situation as an Abort Task Set management function. Because tags are not always provided
by FC and pSCSI HBAs, the firmware instead uses its own internal unique command identification to
abort specific commands (Exchange ID). This issue has been fixed.
Prerequisites
None
Installation instructions
Use HP StorageWorks Library & Tape Tools (L&TT) to update the tape drive firmware. You can download
L&TT from http://www.hp.com/support/tapetools. Online help and instructions are included with
the utility.
NOTE:
Once the download has started, do NOT power off the unit or interrupt the firmware download process
until the download is complete. Doing so could leave the product in a non-usable state.
The firmware files can also be obtained on the external HP support website:
support/storage
NOTE: If you have trouble finding your product or firmware, use the Product Search function from
http//www.hp.com/support/downloads.
Determining current version
You can check your current firmware revision from HP Library & Tape Tools (L&TT). Launch L&TT, select the
product from the lower left hand frame and click on the identity button at the top (if necessary).
Firmware Version
G64D
G66D
Effective date
June 12, 2008
4
. Select your product from the list and follow the instructions from the Web page.
Released
5/7/2007
5/2/2008
http://www.hp.com/
Status
Active
Active
Advertisement
