Table of Contents
Advertisement
Replacing a Fan Module
The chassis mounted fan assembly is easily removed and replaced. Should the
fan assembly need replacement use the following procedure. The fan assembly
is hot pluggable. You do not have to shut down the system to replace a fan.
Step 1
Open the top cover.
Step 2
Disconnect the wires and remove the fan assembly.
Step 3
Unscrew the fan to be replaced.
Step 4
Insert the new fan assembly into place and reconnect the wires.
Step 5
Install the top cover.
Chapter 3 Fiel Replaceable Units 17
Advertisement
Table of Contents
