Changing Camera Settings - HTC Jetstream User Manual

57 Snapbooth and Camera

Changing camera settings

Open the menu panel to access and change camera settings.
To open the camera settings, tap
Some camera features are not available when you're using the front camera, such
as scenes, auto focusing, zooming, and face detection.
Self-timer (photo
mode only)
Scenes
Image adjustments
White balance
Resolution/Video
quality
ISO (photo mode only) Choose an ISO level or set it back to Auto. Higher ISO
Review duration
Storage
Widescreen (photo
mode only)
Geo-tag photos (photo
mode only)
Auto enhance (photo
mode only)
Auto focus (photo
mode only)
Face detection (photo
mode only)
Shutter sound
on the Viewfinder screen.
Set a time delay before your camera automatically takes the
photo.
Choose a scene that best suits the lighting or environment
where you're taking your photos and videos.
Slide your finger across each of the slider bars to adjust the
exposure, contrast, saturation, and sharpness.
White balance enables the camera to capture colors more
accurately by adjusting to your current lighting
environment.
Choose a photo or video resolution to use.
numbers are better for taking pictures in low light
conditions.
Set the time for a captured photo or video to be displayed
on the Review screen before the camera changes back to
the Viewfinder screen.
Choose whether to capture photos and videos to the
internal storage or your storage card.
When this check box is selected (default), photo resolutions
available for selection are in 17:10 ratio and you can use the
entire Viewfinder screen to frame your subject. When not
selected, photo resolutions available for selection are in
standard 4:3 ratio.
Select to store GPS location in your captured photos.
Select to reduce noise when using a high ISO setting and to
automatically adjust photo brightness.
Enables or disables centered auto focus.
Select to automatically recognize faces and adjust the focus
when you take people photos. Face detection will be turned
off if you disable auto focus.
Select to play a sound when you press the shutter release or
record button.