Table of Contents
Advertisement
4. Snap vent grill (B) and hinge cover (E) into
position.
Apply blanking covers (C-D) as indicated.
5. Separate parts Ha, Hb, Hc, Hd as shown in the
figure.
6. Place guide (Ha) on the inside part of the furniture
door, up and down as shown in the figure and
mark the position of external holes. After having
drilled holes, fix the guide with the screws
supplied.
16
7. Fix cover (Hc) on guide (Ha) until it clips into
place.
8. Open the appliance door and the furniture door at
90°. Insert the small square (Hb) into guide (Ha).
Put together the appliance door and the furniture
door and mark the holes as indicated in the figure.
9. Remove the squares and mark a distance of
8 mm from the outer edge of the door where the
nail must be fitted (K).
Hide quick links:
Advertisement
Table of Contents
