Advertisement

Quick Links

INTERNATIONAL LIMITED WARRANTY

ARX Systems (ARX) warrants to the first purchaser of any ARX equipment that it is
free from defects in materials and workmanship under normal use and service. ARX's
sole obligation under this warranty shall be to provide, without charge, parts and
labour necessary to remedy defects, if any, which appear within twelve (12) months
from date of purchase, and for a further twelve (12) months supply parts only.
This is our only warranty. It does not cover finish or appearance items, or if the
equipment has been, in ARX's sole judgement:
•Subjected to misuse, abuse, negligence or accident;
•Repaired, worked on, or altered by persons not authorized by ARX;
•Connected, installed, adjusted or used for a purpose other than that for which
it was designed.
This warranty gives you and us specific legal rights and you may also have other
rights which may apply.

Warranty Service Procedure

Should it become necessary to have your equipment serviced under the
terms of the warranty, please follow these steps:
1.
Call your ARX distributor for a Return Authorization (RA)
number;
2.
Carefully repack the unit, in its original packaging where possible,
including a note with a description of the problem, and a copy of
the receipt showing date of purchase. Attach these to the actual
unit itself. Don't forget to write your name and address clearly,
and include a phone number where you can be contacted during
normal business hours. Make it easy for our service technicians to
contact you if they have a question. Also, use plenty of packing
material - better to be safe than sorry.
3.
Send the unit freight prepaid to ARX Systems, at the address
given you with your RA number. We will pay the return freight
when the serviced unit is returned to you.
4.
We strongly recommend you insure the package. We can't fix it if
it gets lost! Send it by UPS, Fedex, or any similar service that can
track the package. Parcel Post is not recommended
If Warranty Registration Card is missing, please write to ARX in the country of
purchase, stating model and where purchased, or to ARX, PO Box 15,
Cheltenham, Victoria 3192, Australia.
Or you can Email us at: info@arx.com.au
8
Graphic Equalizer Owner's Manual v 2.3CE ©1997 ARX®
GRAPHIC
EQUALIZER
OWNER'S
MANUAL
Graphic Equalizer Owner's Manual v 2.3CE ©1997 ARX®
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EQ series and is the answer not in the manual?

Questions and answers

Summary of Contents for ARX EQ series

  • Page 1 INTERNATIONAL LIMITED WARRANTY ARX Systems (ARX) warrants to the first purchaser of any ARX equipment that it is free from defects in materials and workmanship under normal use and service. ARX’s sole obligation under this warranty shall be to provide, without charge, parts and labour necessary to remedy defects, if any, which appear within twelve (12) months from date of purchase, and for a further twelve (12) months supply parts only.
  • Page 2 Output Connector type Jack and XLR ing standards:EN 55013 : 1990, Sections 3.2 and 3.5 EN 55020 : 1988, Sections 4.3, 5.4, 6.2, 7.0, 8.0. Graphic Equalizer Owner's Manual v 2.3CE ©1997 ARX® Graphic Equalizer Owner's Manual v 2.3CE ©1997 ARX®...
  • Page 3 Replace fuse with correct value only: 100 - 120 V AC 1 amp, 220-240 V AC 0.5 amp. Please also refer to voltage details on Page 2 Graphic Equalizer Owner's Manual v 2.3CE ©1997 ARX® Graphic Equalizer Owner's Manual v 2.3CE ©1997 ARX®...
  • Page 4 Balanced 20 K ohms Thank you for choosing this ARX Graphic Equalizer. We hope you enjoy Unbalanced 10 K ohms using it as much as we enjoyed creating it. As with all ARX equipment, it Input Headroom + 23 dB has undergone extensive factory calibration and ‘burn in’...

This manual is also suitable for:

Eq15Eq60

Table of Contents