Crisper Cover With Lattice On Inner Surface; Design-A-Door; Dairy Bin; Egg Box - LG LFX23961SB Owner's Manual

CRISPER COVER WITH LATTICE ON INNER
SURFACE (on some models)
To remove the crisper cover:
1. Remove both crisper drawers.
2. While holding the crisper cover support (2), pull the
cover up and out(1).
Be careful when handing glass cover since
glass is not attached to cover.
To remove the lattice on inner surface:
1. Remove crisper cover(as illustrated above).
2. Hold the glass cover and overtum crisper cover.
3. For each lattice hold lattice and pull sides of the cover
outward to remove lattice.
To replace lattice on inner surface:
1. For each lattice insert middle tab in 1 (closed to glass
cover) and pull sides of the cover to insert lattice.
USING YOUR REFRIGERATOR
21

DESIGN-A-DOOR

The door bins are removable for easy cleaning and
adjusting.
1. To remove the bin, simply lift the bin up and pull
straight out.
2. To replace the bin, slide it in above the desired support
button and push down until it stops.
Somebody can be hurt if door bins are not
firmly assembled.
NOTE: DO NOT adjust a bin that is loaded with food.
DO NOT allow children to play with
baskets. Sharp corners on baskets could cause injury .

DAIRY BIN

1. To remove the dairy bin, simply lift it and pull straight
out.
2. To replace the dairy bin, slide it in above the desired
location and push down until it stops.

EGG BOX

Store Egg Box on interior shelf, not on door shelf.
Do not use the egg box as an ice storage
bin in the freezer compartment. The egg box can easily
break if it freezes.