When Writing Or Rewriting - Toshiba PSAA8C-17202C User Manual

User manual
Table of Contents

Advertisement

The following special media recommended the next manufacturers:
Multi-speed and High-speed CD-RW:
MITSUBISHI CHEMICAL CORPORATION, RICOH Co., Ltd.
Ultra-speed CD-RW:
MITSUBISHI CHEMICAL CORPORATION
TOSHIBA has confirmed the operation of CD-R and CD-RW media of the
manufacturers above. Operation of other media cannot be guaranteed.
CD-RW can generally be rewritten about 1,000 times. However, the
actual number of rewrites is affected by the quality of the media and the
way it is used.
Be sure to connect the AC adaptor when you write or rewrite.
Be sure to close all other software programs except the writing
software.
Do not run software such as a screen saver which can put a heavy load
on the CPU.
Operate the computer at full power. Do not use power-saving features.
Do not write while virus check software is running. Wait for it to finish,
then disable virus detection programs including any software that
checks files automatically in the background.
Do not use hard disk utilities, including those intended to enhance HDD
access speed. They may cause unstable operation and damage data.
Write from the computer's HDD to the CD. Do not try to write from
shared devices such as a LAN server or any other network device.
Writing with software other than RecordNow! has not been confirmed.
Therefore, operation with other software cannot be guaranteed.

When writing or rewriting

Note the following when you write or rewrite a CD-R or CD-RW.
Always copy data from the HDD to the CD. Do not use cut-and-paste.
The original data will be lost if there is a write error.
Do not perform any of the following actions:
If the media is poor in quality, dirty or damaged, writing or rewriting
errors may occur.
User's Manual
Change users in the Windows XP operating system.
Operate the computer for any other function, including use of a
mouse or Touch Pad, closing/opening the LCD panel.
Start a communication application such as a modem.
Apply impact or vibration to the PC.
Install, remove or connect external devices, including the following:
PC card, USB devices, external display, i.LINK devices, optical
digital devices.
Open the optical media drive.
Operating Basics
4-10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Psaanc-03605cA100

Table of Contents