Chapter 2 Downloading And Printing Images; Downloading Images To Your Computer - Canon PowerShot SD400 Software User's Manual

Chapter 2
Downloading and Printing Images
This chapter explains a sequence of ImageBrowser basic procedures in
order, such as downloading images from the camera and printing
downloaded images. This section starts by explaining the procedures for
downloading images from the camera.
IMPORTANT
• This guide assumes that all the relevant software programs
and drivers have been correctly installed on your computer. If
you have not yet installed them, read the guides for the
software supplied with your camera and install them.
Auto Start Settings the First Time ImageBrowser Is Used
This section explains the settings for automatically opening the
Camera Control Window when you connect your camera to a
computer.
IMPORTANT
• You must perform this step before connecting the camera to a
computer for the first time.
8
ImageBrowser Software User Guide

Downloading Images to Your Computer (1/6)

Mac OS X v10.2/v10.3
1.
Start Image Capture.
Image Capture is a program supplied as part of Mac OS X. It is
usually contained in the Applications folder.
2.
In the [Image Capture] menu, select [Preferences].
3.
In the [When a camera is connected, open:] list box,
select [Other].
4.
Select [CameraWindow] in the application selection
window and click [Open].
CameraWindow is found by opening the [Applications] folder,
followed by the [Canon Utilities] and [CameraWindow] folders.
5.
Click [OK] and close Image Capture.