AEG ARCTIS 1333-6 i Operating And Installation Instructions page 21

Place guide (A) on the inside part
of the furniture door, in upper and
lower positions as shown in the
figure and mark the position of the
holes. After having drilled holes,
A
fix the guide with the screws sup-
plied.
PR166
Fix cover (C) on guide (A) until it
clips into place.
A
C
PR33
Open the appliance door and the
furniture door at 90¡. Insert the
8mm
small square (B) into guide (A).
Put together the appliance door
and the furniture door and mark
the holes as indicated in the figu-
re. Remove the squares and drill
holes with ¿ 2 mm at 8 mm from
the outer edge of the door. Place
A
the small square on the guide
again and fix it with the screws
supplied.
B
PR167
21