∫
To filter images for slide show playback
You can filter images and play them back in a slide show by selecting
[Filtering] on the slide show menu screen.
•
If you select [All], you can play back all images in a slide show.
You can also filter images by using the same setting as [Filtering Play]. Refer
to
P83
–
84
for the setting.
•
The filter settings are stored even after terminating slide show playback. To
cancel filtering, refer to P83.
∫
Changing the slide show settings
By selecting [Setup] on the slide show menu screen, you can change the
settings such as [Effect] and [Duration] for slide show playback.
Settings
[Effect]
[Duration]
[Repeat]
[Sound]
Playback/Editing
This allows you to select the screen effects or music effects when
switching from one picture to the next.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF]
•
When [URBAN] has been selected, the picture may appear in black and
white as a screen effect.
•
Some [Effect] will not operate when playing back pictures displayed
vertically.
•
When [Filtering] is set to [Motion Pic. Only], [Effect] is fixed to [OFF].
[1 SEC.]/[2 SEC.]/[3 SEC.]/[5 SEC.]
•
When playing back the following pictures, the [Duration] setting is
disabled.
–
Motion pictures
–
Panorama pictures
[ON]/[OFF]
[OFF]:
There will be no sound.
[AUTO]:
Music is played when the still pictures are played back,
and audio is played when the motion pictures are played
back.
[Music]:
Music is played back.
[Audio]:
Audio (only for motion pictures) is played back.
Description of settings
- 82 -