Body and drum are corrosion
The hopper and cutter block are
made of stainless steel.
Drum and block are easy to remove.
The hopper has a safety plate which
allows potatoes to pass but not the
hand of an operator.
The potato chipper is designed to
satisfy the requirements of
restaurants, collective kitchens and
food industries who need to cut a
large quantity of chips in a short
The machine will stop immediately if
the hopper is opened during operation
or if the cutter block is not properly
The automatic feed is ideal for use in
large catering kitchens and specialised
chip production industries..
The approximate output for 12 mm
chips is approximately 25 Kg/min.