Adobe 38000511 - Macromedia Flash Basic Installation Manual page 9

If you have a Flash Media Server 3 license (LIC) file, place it in the RootInstall/licenses folder and restart the
13
server.
To verify your installation, see
14
Install the server on Linux
Log in as a root user (required to install Flash Media Server).
1
Locate the installation file, FlashMediaServer3.tar.gz.
2
This file is on your installation CD, or you may have downloaded it.
Copy the file to a directory on your local disk.
3
Open a shell window and switch to the directory with the installation file.
4
5 Untar the installation file:
tar -xzf FlashMediaServer3.tar.gz
A directory with the installation program is created.
At the shell prompt, enter
6
Start the installation program with the following command:
7
./installFMS
The installation program starts and displays a welcome message.
8 Press Enter to start the installation.
By default, Flash Media Server is installed to the
Follow the installation instructions on your screen.
9
Enter a user for Flash Media Server processes to run as. The default is the "nobody" user. (The user you select is
also the owner of the Flash Media Server files.) Your choices are written to the fms.ini file; you can edit the
fms.ini file to modify this and other security properties later, if needed.
You will be asked to enter a serial number. If you don't enter a serial number, or if you enter an invalid serial
number, Flash Media Development Server is installed. After installation, you can enter a serial number in the
fms.ini file to upgrade to Flash Media Streaming Server or Flash Media Interactive Server.
Review the summary of the installation options you have chosen, which are displayed in the installer.
10
The installation is complete. If you configured it to start automatically, the Flash Media Server service starts. To
start the server manually, enter
./fmsmgr server fms start
If you have a Flash Media Server 3 license (LIC) file, place it in the RootInstall/licenses folder and restart the
11
server.
12 To verify your installation, see
Stacking license files and serial numbers
You can stack Flash Media Interactive Server 3 license files and serial numbers to increase the number of processors
a computer hosting the server can use. You can stack an unlimited number of license files and serial numbers.
Note: You cannot stack license files or serial numbers for Flash Media Streaming Server 3.
Verifying installation.
and navigate to the directory created in step 5.
cd
/opt/adobe/fms
fmsmgr server fms start
.
Verifying installation.
directory.
. If you're in the RootInstall directory, enter
ADOBE FLASH MEDIA SERVER
Installation Guide
6