Asus P5GC-VM User Manual page 41

3. Serial ATA connectors (7-pin SATA1 [red], SATA2 [red], SATA3 [black],
SATA4 [black])
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
drives.
P5GC-VM SATA Connectors
When using the connectors in Standard IDE mode, connect the primary (boot)
hard disk drive to the SATA1/2 connector. Refer to the table below for the
recommended SATA hard disk drive connections.
Serial ATA hard disk drive connection
Connector
SATA1/2
SATA3/4
4. Speaker connector (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker. The
speaker allows you to hear system beeps and warnings.
P5GC-VM Speaker Out Connector
ASUS P5GC-VM
Color
Red Master
Black
SPEAKER
1
Setting
Boot disk
Slave Data Disk
Speaker Out
GND
GND
+5V
Use
1-29