Asus P5BV-C - Motherboard - ATX User Manual page 27

2. Press the load lever with your
thumb (A), then move it to the left
(B) until it is released from the
retention tab.
To prevent damage to the socket pins, do not remove the PnP cap unless you
are installing a CPU.
3. Lift the load lever in the direction of
the arrow to a 135º angle.
4. Lift the load plate with your thumb
and forefinger to a 100º angle (4A),
then push the PnP cap from the
load plate window to remove (4B).
5. Position the CPU over the socket,
making sure that the gold triangle
is on the bottom-left corner of the
socket. The socket alignment key
should fit into the CPU notch.
ASUS P5BV-C Series
Retention tab
A
B
Load lever
4B
3
CPU notch
Alignment key
PnP cap
Load plate
4A
Gold
triangle
mark
2-7