The following item appears only when you installed an Intel
later CPU that supports the Enhanced Intel SpeedStep
Intel(R) SpeedStep Technology [Automatic]
Allows you to use the Enhanced Intel
[Enabled], you can adjust the system power settings in the operating system to
use the EIST feature. Set this item to [Disabled] if you do not want to use the EIST.
Configuration options: [Automatic] [Disabled]
Intel(R) C-STATE Technology [Enabled]
Allows you to enable or disable the C-STATE technology. Configuration options:
[Enabled] [Disabled]
2.4.4
Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press <Enter> to display the sub-menu.
Chipset Settings
WARNING: Setting wrong values in below sections
may cause the system to
NorthBridge Configuration
NorthBridge Configuration
North Bridge chipset Configuration
Memory Remap Feature
Configure DRAM Timing by SPD
Initiate Graphic Adapter
Initiate Graphic Mode Select
DVMT Mode Select
DVMT/FIXED Memory
PEG Port Configuration
PEG Force x1
Memory Remapping Feature [Disabled]
Allows you to enable or disable the remapping of the overlapped PCI memory
above the total physical memory. Enable this option only when you install 64-bit
operating system.
Configuration options: [Disabled] [Enabled]
2-22
SpeedStep
Technology. When set to
®
®
malfunction.
[Disabled]
[Enabled]
[PEG/PCI]
[Enabled, 8MB]
[Fixed Mode]
[128MB]
[Disabled]
Pentium
4 or
®
®
Technology (EIST).
®
Chapter 2: BIOS setup