Asus P4T-F User Manual page 31

3. HARDWARE SETUP
3.7.3 Accelerated Graphics Port (AGP Pro)
This motherboard provides an accelerated graphics port (AGP Pro) to support a new
generation of AGP graphics cards with ultra-high memory bandwidth.
P4T-F
P4T-F Accelerated Graphics Port (AGP PRO)
IMPORTANT: Only 1.5V AGP cards are supported. ASUS
rated for both 1.5 and 3.3 Volts. Early AGP cards only operate at 3.3 volts and will
not fit properly into the new AGP 4X slots. See examples of both types below:
An early 3.3V AGP card:
Do not use.
3.7.4 Communications and Networking Riser (CNR)
This connector supports specially designed network, audio, or modem riser cards.
Main processing is done through software adn controlled by the motherboard's
system chipset. This provides upgradeable network, audio, and/or modem solutions
at an incredibly low cost.
P4T-F
P4T-F Communication & Networking Riser Connectors
AGP Card without Retention Notch
20-pin bay
A new 1.5 / 3.3V AGP card:
ASUS P4T-F User's Manual
TOP VIEW
28-pin bay
Rib (inside slot) Rib
®
AGP 4X cards are
OKAY to use.
31