Setting Up The Services; Setting Up From Your Computer; Setup Workflow; Setting Up With The Printer Software Disc - Epson WorkForce 435 Manual

Epson Connect Guide
Setting up the
Services
To use the Epson Connect services and other mobile
services, you need to first register your printer.
Setting Up from Your
Computer
You can start up the Epson Connect services from your
computer by using the installer provided on the printer
software disc.

Setup workflow

1. Basic printer setup
Install the ink cartridges
Setup on the printer's control panel
Insert the printer software disc
Connect to the network
2. Connecting to Epson Connect
Register Printer and User Information
3. Setting up Scan to Cloud
Create Scan to Cloud Destination List
4. Setting Remote Print service
Check that remote printing is enabled

Setting up the Services

Setting up with the printer
software disc
Create your Epson Connect account and register your
printer to the Epson Connect service.
Before starting setup, check that your computer is
connected to the Internet with a Wi-Fi or Ethernet
network.
Note:
❏ JavaScript must be enabled in your browser to
register the printer.
❏ If you need to use a proxy server for your printer to
connect to the Internet, check that the correct proxy
settings have been made in Internet Explorer.
❏ The following Internet connection is recommended
to register the printer.
Minimum download speed: 512 Kbps or faster
Recommended download speed: 1 Mbps or faster
1. Basic printer setup
First, connect your printer to the network so that it can
be used from a computer. Follow the instructions in the
"Start Here" setup guide to perform your printer's initial
setup and network setup.
Note:
Depending on the model being used, setup for Epson
Connect may start straight after the printer's initial
setup. If it does start, follow the on-screen instructions.
2. Connecting to Epson Connect
Next, use the Epson Connect Printer Setup to create
your Epson Connect account and register your printer.
Note:
If you do not perform setup straight after the printer's
initial setup, check that the printer is on.
13