Agilent Technologies 66312A Programming Manual page 40

4 - Language Dictionary
ABORt
CALibrate
:CURRent
[:SOURce]
[:DC] [:POSitive]
:NEGative
:MEASure
[:DC] :LOWRange
:AC
:DATA <n>
:LEVel <level>
:PASSword <n>
:SAVE
:STATE <bool> [,<n>]
:VOLTage
[:DC]
:PROTection
DISPlay
[:WINDow]
[:STATe] <bool>
:MODE <mode>
:TEXT [:DATA] <string>
INITiate
[:IMMediate]
:SEQuence[<n>]
:NAME <name>
CONTinuous
:SEQuence1, <bool>
:NAME TRANsient, <bool>
MEASure | FETCh
:ARRay
:CURRent [:DC]?
:VOLTage [:DC]?
[:SCALar]
:CURRent [:DC]?
:ACDC?
:HIGH?
:LOW?
:MAX?
:MIN?
:VOLTage [:DC]?
:ACDC?
:HIGH?
:LOW?
:MAX?
:MIN?
40
Table 4-1. Subsystem Commands Syntax
Resets the trigger system to the Idle state
:
Calibrate positive output current and high current
measurement range
Calibrate negative output current
Calibrate low current measurement range
Calibrate ac current measurement circuits
Input a calibration measurement
Advance to next calibration step (P1 | P2)
Set calibration password
Save new cal constants in non-volatile memory
Enable or disable calibration mode
Calibrate output voltage and voltage readback
Begin voltage protection calibration sequence
Enable/disable front panel display
Set display mode (NORM | TEXT)
Sets the text that is displayed
Initiate a specific numbered sequence (1 | 2)
Initiate a specific named sequence (TRAN | ACQ)
Set continuous initialization
Set continuous initialization
Returns the digitized instantaneous current
Returns the digitized instantaneous voltage
Returns dc current
Returns the total rms current (ac+dc)
Returns the HIGH level of a current pulse
Returns the LOW level of a current pulse
Returns maximum current
Returns minimum current
Returns dc voltage
Returns the total rms voltage (ac+dc)
Returns the HIGH level of a voltage pulse
Returns the LOW level of a voltage pulse
Returns maximum voltage
Returns minimum voltage