Table of Contents
Advertisement
3
Set Up Your System
Phones
Overview
Phone connection using a USB port
Phone connection using direct serial (RS-232) port
28
The Agilent E6474A system supports a wide range of phones
and data communication devices. A list of the currently
supported phones can be found in the documentation
library. To access this list open the E6474A software and
select Help > Library.
Phones can be connected to your system using the following
methods:
Phone battery charging and audio monitoring are not supported with direct
NOTE
connect phones.
Most phones can be connected to your system using USB
interface cables.
The USB drivers used by these phones may require custom
installation processes. Follow the phone manufacturer's
instructions for configuring USB phone connections. It is
recommended that you read the phone manufacturer's
instruction before you connect any devices to your laptop.
Depending on the type of phone you wish to connect to your
laptop, it may be possible to connect the phone directly to
your laptop serial (RS- 232) port.
Refer to the phone manufacturer's instructions before
connecting a phone.
Agilent E6474A User's Guide
Advertisement
Table of Contents
