AEG LAVAMAT 50212 Operating Instructions Manual page 20

Problem
Washing has not been
spun.
Water is running out
from under the washing
machine.
Wash water is foaming
excessively.
The (END) indicator
flashes 2x.
(Problems with water
outflow.)
Fabric softener not
rinsed in,
w compartment for
conditioners is filled
with water.
20
Possible cause
Only a few large items of
washing in the drum.
Screw connection on the in-
let hose is leaking.
Drain hose is leaking.
Drain pump cover is not
closed properly.
Washing was caught in the
door.
Emergency drain hose is
leaking.
Too much detergent has
probably been used.
Kink in drain hose.
Maximum pumping height
of 1m has been exceeded.
Drain pump is blocked.
For sink spigot connections:
The sink spigot is blocked.
Fabric softener insert in the
compartment for condition-
ers is not correctly inserted
or is blocked.
Remedy
Always load the drum as full
as possible. Mix large and
small items.
Screw the inlet hose on
tightly.
Replace drain hose.
Close the cover properly.
Load washing carefully for
the next wash.
Close off emergency drain
hose properly.
Follow the manufacturer's
instructions exactly when
measuring out detergent.
Straighten the hose.
Please contact customer
service.
Switch off the appliance. Re-
move the mains plug.
Clean the drain pump. Re-
move any foreign objects
from the pump housing.
Clean the sink spigot.
Clean the detergent drawer,
insert the fabric softener
insert firmly.