Opening And Closing The Filling Door; Add The Washing - AEG OKO-LAVAMAT 72640 Operating Instructions Manual

Opening and closing the filling door

0 Open: Pull on the handle of the filling door.
Close: Press the filling door firmly closed.
0
The displays K (DOOR) and O/s (START/PAUSE) show
when the unit is switched on whether the filling door
can be opened.
Display K (DOOR)
lights up green
lights up green
is off
1) Filling door is locked because of a high water level or high temperature
If
3
– the display K (DOOR) flashes red,
– then the error code E40 flashes in the multi display,
– and the display l (MAIN WASH) flashes,
an attempt was made to start a washing program without the filling
door being correctly closed. In this case, press the filling door firmly
closed and start the washing program again.

Add the washing

For the maximum filling quantities, see the "Program tables".
3
See "Sort and prepare washing" for information on correctly preparing
the washing.
0 1. Sort and prepare the washing according to type.
2. Open the filling door: Pull on the handle of the filling door.
3. Fill with washing.
Important! When closing the door, make
sure no items of washing get stuck! This
could damage textiles and the unit.
4. Close the filling door securely.
Display O/s (START/PAUSE)
flashes red
lights up red
flashes red
or lights up red
Operating Instructions
Door opening possible?
Yes
yes, after the O/s (START/
PAUSE) key is pressed
1)
No
21