Introduction Thank you for purchasing the P200N portable, battery operated, thermal serial printer. Your printer comes with this manual, two rolls of 2.25 in. thermal paper, a 9VDC wall adaptor, for charging the printer’s batteries, and a serial cable designed to hook up to the Copicode Alpha, the TC4N, and other products.
Forwarding the Printer Paper To forward the thermal paper, press the paper scroll button between the ON and OFF buttons. Self Test Function It is easy to test the P200N for operation through a self test procedure. With the printer OFF, first press the paper scroll button, and while holding it, press the ON button for about a second.
Page 4
If there is no activity for 10 seconds after a parameter is displayed for possible change, the final parameter settings are printed one more time, and the printer goes into normal READY mode. Parameter changes, if any, are saved if the 10 second timeout occurs, or if the LEFT ARROW button is pressed.
Need help?
Do you have a question about the P200N and is the answer not in the manual?
Questions and answers