Asus P4BP-MX 2.0 User Manual page 27

3. ATX power connectors (20-pin ATX_POWER1, 4-pin ATX12V1)
These connectors connect to an ATX 12V power supply. The plugs from the
power supply are designed to fit these connectors in only one orientation. Find
the proper orientation and push down firmly until the connectors completely fit.
In addition to the 20-pin ATX power connector, this motherboard requires that
you connect the 4-pin ATX +12V power plug to provide sufficient power to the
CPU.
P4BP-MX 2.0
P4BP-MX 2.0 ATX Power Connectors
Make sure that your ATX 12V power supply can provide 8A on the +12V lead
and at least 1A on the +5-volt standby lead (+5VSB). The minimum
recommended wattage is 230W, or 300W for a fully configured system. The
system may become unstable and may experience difficulty powering up if the
power supply is inadequate.
4. Internal audio connectors (4-pin CD, AUX)
These connectors allow you to receive stereo audio input from sound sources
such as a CD-ROM, TV tuner, or MPEG card.
P4BP-MX 2.0
P4BP-MX 2.0 Internal Audio Connectors
ASUS P4BP-MX 2.0 motherboard
ATX12V1
+12V DC +12V DC
GND GND
CD(Black) AUX(White)
ATX_POWER1
Pin 1
+12.0VDC
+5.0VDC
+5VSB
+5.0VDC
PWR_OK
-5.0VDC
COM
COM
+5.0VDC
COM
COM
COM
+5.0VDC
PS_ON#
COM
COM
+3.3VDC -12.0VDC
+3.3VDC +3.3VDC
1-17