Biostar H61MGC Setup Manual page 23

<Update BIOS>
Before doing this, please download the proper BIOS file from the website.
After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.
After the BIOS Update process, click on
OK to restart the system.
While the system boots up and the full screen logo shows, press
key to enter BIOS setup.
In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.
All the information and content above about the software are subject to be changed
without notice. For better performance, the software is being continuously updated.
The information and pictures described above are for your reference only. The actual
information and settings on board may be slightly different from this manual.
H61MGC / H61MLC
Click Update BIOS button, a dialog will
show for asking you backup current
BIOS. Click Yes for BIOS backup and
refer to the Backup BIOS procedure; or
click No to skip this procedure.
The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.
<Delete>
21