Electrolux ESF 68010 User Manual page 27

This appliance is equipped with the "3
in 1 function", that allows the use of
the "3 in 1" combi detergent tablets.
These products are detergents with a
combined cleaning, rinsing and salt
functions. They can also contain other
different agents depending on which
kind of tablets you choose ("3 in 1", "4
in 1", "5 in 1" etc...)
Check whether these detergents are
suitable for your water hardness. See
the manufacturers instructions.
Once this function is selected it will
remain active also for the following
washing programmes.
With the selection of this function the
inflow of rinse aid and salt from each
respective supply container is
automatically deactivated and also the
displayed messages for salt and rinse
aid are deactivated.
Select the "3 in 1 function" before the
start of a washing programme.
With the use of the "3 in 1 function",
the cycle durations may change. In
this case, in the display, the indication
of the time is automatically updated.
Once the programme is running, the
"3 in 1 function" can
changed. If you want to exclude the
"3 in 1 function" you have to cancel
the programme setting and then
deactivate the "3 in 1 function".
In this case you have to set a
washing programme (and desired
options) again.
longer be
If the drying results are not
satisfactory we recommend that you:
1. Fill up the rinse aid dispenser with
rinse aid.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to
position 2.
The activation/deactivation of the
rinse aid dispenser can only be
possible with the "3 in 1 function"
active.
1. Deactivate the "3 in 1" function.
2. Fill up the dispensers for salt and
rinse aid again.
3. Adjust the water hardness setting
to the highest setting and perform
1 normal washing programme
without loading any dishes.
4. Adjust the water hardness setting
according to the hardness of the
water in your area.
5. Adjust the rinse aid dosage.
electrolux