Table of Contents
Advertisement
The following table describes the parameters in this screen. Settings in boldface are the default and
suggested parameter settings
.
Parameter
Boot Display
Screen Expansion
Resume on LAN/Modem Access
Fast Boot
Boot on LAN
CPU Power Management Mode
Boot Drive Sequence
R
TM
Technology There are three CPU speeds available for users to
Intel
SpeedStep
Setting the Boot Drive Sequence
The Boot Drive Sequence section lists boot priorities (1st, 2nd, 3rd and 4rd ) for bootable drives in your
computer.
For example, the default value (1st: Floppy Disk, 2nd: CD-ROM, 3rd: Hard Disk) tells the computer to first
search for a bootable floppy disk in the floppy drive. If it finds one present, it boots up from that floppy disk. If
not, the computer continues to search for a bootable CD-ROM in the CD-ROM drive. If it cannot boot up from
the CD-ROM drive, it continues by booting up from the hard disk.
To set the boot drive sequence, use the
z
x
the
/
keys to select the device for that priority level.
Chapter 2
Description
Sets the display device on boot-up.
When set to Auto, the computer automatically
determines the display device when the computer
starts up. If an external display device (e.g., monitor)
is connected, it becomes the boot display; otherwise,
the computer's display screen is the boot display.
When set to Both, the computer outputs to both the
computer display screen and an external display
device if one is connected.
Expand the screen on the graphic/text mode.
When it is disabled, the graphic/text mode expansion
function is disabled and the graphic/text image will be
centralized on the LCD. If it is enabled, the graphic/
text image will be expanded to the full LCD screen.
Allows you to define your system's booting process;
whether to skip some POST routines or proceed with
the normal booting process.
If disable Boot from LAN, BIOS should remove "boot
drive sequence --> LANDesk Service Agent" item.
CPU power management setting
Specifies the order in which the computer starts up
from. Please refer to below section.
specify the CPU speed.
w
y
/
keys to select a priority level (1st, 2nd, 3rd and 4rd), then use
Options
Both or Auto
Enabled or Disabled
Enabled or Disabled
Disabled or Ensabled
Disabled or Enabled
Auto or Disabled
1st: Floppy Disk
2nd: CD-ROM
3rd: Hard Disk
4rd: ---
Automatic
Maximum
Battery Optimized
33
Advertisement
Table of Contents
