Acer TravelMate 2400 Service Manual page 43

The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
Date and Time
Quiet Boot
Power on display
LCD Auto Dim
Network Boot
F12 Boot Menu
D2D Recovery
NOTE: You can also enable Acer disc-to-disc system recovery via Alt+F10 during POST.
Chapter 2
Description
The hours are displayed with 12 hour format. The
values setin these two fields take effect
immediately.
Determines if the system will display customer
logo and summary screen or not.
Enable: Customer logo is displayed, and
summary screen is disabled.
Disabled: Custoemr logo is not displayed, and
summary screen is enabled.
Auto: During power process, the system will
detect if any display device is connected on
external video port. If any external display device
is connected, the power on display will be in CRT
(or projector) only mode. Otherwise it will be in
LCD only mode.
Both: Simultaneously enable both the integrated
LCD screen and the system's external video port
(for an external CRT or projector).
Determines if the system will automatically dim
the LCD brightness in order to save power when
AC is not present.
The system will support an automatic dimming of
the LCD backlight when the AC power is NOT
available (running on battery power).
Enables, disables the system boot from LAN
(remote server).
Enables, disables Boot Menu during POST.
Enables, disables D2D Recovery function. The
function allows the user to create a hidden
partition on hard disc drive to store operation
system and restore the system to factory
defaults.
Format/Option
Enabled
Option: or Disabled
Auto
Option: or Both
Enabled
Option: or Disabled
Enabled
Option: or Disabled
Disabled
Option: or Enabled
Enabled
Option: or Disabled
37