Download Print this page

Graco 1F01GSV - SnugGlider Swing Holds SnugRide Infant Car Seat Owner's Manual page 13

Owners manual

Advertisement

• Démarrer la balançoire
12
WARNING
Always use infant car seat harness.
TO TURN SWING ON:
Rotate the speed dial up, and lightly push the swing to get it started.
Observe the swinging motion for a minute. It takes time for the swing
to adjust to a setting. Change setting if needed by moving the dial up
for faster speeds or down for slower.
TO TURN SWING OFF: Turn dial down until it "CLICKS" into the
"OFF" position.
A small, quiet baby will swing higher on each setting than a larger,
more active baby.
Your seat may be stopped at any time the motor is running without
damaging the motor. Push swing to restart.
If your swing motor stops operating by itself, a protective device may
have been activated. Turn off motor, wait three minutes, then restart
swing.
Starting Swing
• Activación del columpio
avoid serious injury from falling or sliding out.
ON
Allumé
Encender
Speed Dial
Cadran de vitesse
Dial de la velocidad
OFF
Fermé
Apagar
13

Advertisement

loading

This manual is also suitable for:

Snugglider