Setting Up A Wireless Connection Using Wps (Pin-Only); Using The Wireless Network List - Vizio VBR210 User Manual

VBR210

Setting Up a Wireless Connection Using WPS (PIN-Only)

Many newer routers feature WiFi Protected Setup, which allows you to setup a
wireless network without manually entering connection information. Follow the
instructions in this section if your WPS-enabled router does not have a WPS
button.
To set up a wireless connection using a WPS PIN:
1. From the Network Menu, use the
Arrow buttons on the remote to
highlight Wireless and press SELECT.
The Wireless menu is displayed.
2. Use the Arrow buttons on the remote
to highlight Network List and press
SELECT.
A list of available wireless networks is
displayed.
3. Use the Arrow buttons on the
remote to highlight the name of your
WPS-enabled wireless network, then
press SELECT.
4. Use the Arrow buttons to highlight
WPS Pin and press SELECT.
5. Use the Number Pad on the remote
to enter your WPS Pin (usually found
on the back of your router), then press
SELECT.

Using the Wireless Network List

The Wireless Network List uses a series of symbols to give you all the information
you need at a glance. Use the table below to familiarize yourself with these
symbols:
Category Icon
Connection
Saved
Security
Protocol
Signal Strength
Definition
Displayed when the player is connected to
the associated network.
Displayed when the network properties,
including password, have been saved in
the player's memory.
Indicates whether the associated network
is encrypted or not. If the "Locked" symbol
is overlaid with a red cross, it means the
encryption type is unsupported by the
player.
Indicates the network protocols supported
by the associated network.
Indicates the signal strength of the
associated network. The more green bars,
the better the network strength.
4
27