Memorex Mi1112 - Micro System User Manual page 19

TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
The CD player in this unit has a 20 track programmable memory that allows you
to program up to 20 tracks on any disc for playback in any desired order. You may
program 20 different tracks or you may also program certain tracks to play more
than once.
To perform programmed playback, proceed as follows:
1
With the desired disc selected
(see Step 3 on page 15) and
while in the Stop mode, press
the PROGRAM/Memory button.
"PROGRAM", the track number
and "P01" (the program number)
will blink/appear in the display.
3
Press the PROGRAM/Memory
button to memorize the track.
Repeat Steps 2 and 3 to program
additional tracks up to a maximum
of 20 tracks.
NOTE:
• To clear the memory, while in the Stop mode, press the
PROGRAM/Memory button followed by the STOP (I) button.
SEE NEXT PAGE FOR MORE NOTES ON PROGRAMMING THE MEMORY.
OPERATION (CONTINUED)
2
1
2
1
2
2
Select a track to be programmed
using the Tune Up/Skip n 1 or
Down/Skip o 2 button.
4
Press the
button to begin program playback.
19
1
Play/Pause (®p)
1
1