Table of Contents
Advertisement
Operating Instructions
Activating/deactivating the acoustic signal
The acoustic signal can indicate acoustically:
– at which water hardness the water softener is set.
– when a dishwashing cycle has finished.
– when an error has occurred with the dishwasher.
You can switch on/off the acoustic signal in the following way:
1. Press the ON/OFF button.
The LED indicators for all programme buttons (and the button for the
delay start timer if present) light up. The LED indicators and any option
buttons that are present only light up if they are activated.
If the only LED indicator illuminated is one that belongs to a pro-
3
gramme button, this means that this dishwashing cycle has been acti-
vated. The dishwashing cycle must be cancelled:
Press function buttons 2 and 3 simultaneously for approx. 1 second.
The LED indicators for all programme buttons (and the button for the
delay start timer if present) light up. The LED indicators and any option
buttons that are present only light up if they are activated.
2. Press function buttons 2 and 3 simultaneously and keep them pressed.
The LED indicators for function buttons 1 to 3 will flash.
3. Press function button 3.
The LED indicator for function button 3 will flash.
L
The
L
The
L
The
flashing:
4. Pressing function button 3 will change the setting.
5. Once the
OFF button. The setting is now saved.
In Daily Use
• Check the salt and rinse aid levels.
• Load cutlery and dishes into the dishwasher
• Fill with dishwasher detergent
• Select a wash programme suitable for the cutlery and dishes
• Start the wash programme
18
display will indicate the current setting:
indicator is flashing: Acoustic signal activated (ex-factory setting)
indicator is not
L
display is indicating the required setting, press the ON/
Acoustic signal deactivated
Hide quick links:
Advertisement
Table of Contents
