Troubleshooting - Maretron GPS200 User Manual

Gps antenna/receiver
Hide thumbs Also See for GPS200:
Table of Contents

Advertisement

GPS200 User's Manual

5 Troubleshooting

If you notice unexpected operation of the Maretron GPS200, follow the troubleshooting
procedures in this section to remedy simple problems.
Symptom
No data output
If these steps do not solve your problem, please contact Maretron Technical Support (refer to
Section 7 for contact information).
Warning: There are no user-serviceable components inside the Maretron GPS200. Opening
the GPS200 will expose the sensitive electronic components to adverse environmental
conditions that may render the unit inoperative. Please do not open the GPS200, as this will
automatically void the warranty. If service is required, please return the unit to an authorized
Maretron service location.
Page 8
Troubleshooting Procedure
Check the connections to the NMEA
®
2000
connector and tighten if
necessary
Ensure that power is supplied to the
connected NMEA 2000
Ensure that the GPS200 has a clear
view to the horizon in all directions
Ensure that no VHF, satellite, or radar
antennas have been mounted near the
GPS200
®
cable
Revision 1.2

Advertisement

Table of Contents
loading

Table of Contents